Kurt Positions 20 Workholding Options For Today’s Shrinking CNC Machining Centers

November 3, 2015 2:35 pm

Minneapolis, Minnesota – Kurt’s line up provides machinists with a first ever, wide array of holding options for their work pieces being machined on small CNC tables. The product line is categorized by workholding envelopes fitting machine tables measuring 16 inches or smaller in the Y dimension.

Kurt’s small machine table workholding options range in size from a 5.00” length up to a 15.500” length vise. Models are available in single station, double station, and self centering styles to accomplish an ideal holding solution for a wide variety of part configurations and density. Manual and hydraulic options are available to suit the requirements from short to high volume production.

Clamping force for this Kurt workholding line ranges from 1,800 lbs of force up to 12,600 lbs and is dependent on the model selected and whether manual or hydraulic actuation is  utilized. Many additional features encompass the line including Machinable Jaws, Hard Jaws, and many of Kurt’s well known features such as the AngLock™ and Pull-type features — all which reduce jaw lift and create the most rigid and immobile work piece solution.

All Kurt vises are manufactured in Kurt’s employee owned USA plant. Quality is further ensured by Kurt’s lifetime “Iron Clad™” warranty for workmanship and materials.

See the complete line with photos, drawings and specifications for all 20 models at www.kurtworkholding.com or call for FREE brochure in USA toll free 877-226-7823. Outside USA 763-574-8309. Email: [email protected].

7327 Kurt Worklholding 20 Options for Small Machines

Leave a Reply