Can someone help me with this wiring? Its an area i dont have much experience with. I dont want to fry something, Me included.
I pulled the panel off of this to find some loose wires. I have another section of this yellow cord that i can connect from the box to the motor, but im not exactly sure which goes where. I see the diagram on the panel, but thats not even quite clear to me. The previous owner wired it for 110. I am trying to wire it for 220.

I see L1 and L2 on the box. I see something like T5 on the bottom.






Heres the box. This is pretty much how this came. I removed the older cable, and put in this new Yellow cable. I had to rebuild the top center terminal. The screw was missing and the plastic was a little bit shattered. The previous owner had the ground just hanging loose. Down below, it was all disconnected, and the cable went out that bottom left hole and was cut a few inches out.