What's new
What's new

churchill cylindrical grinder wheel problem

puneetnew

Plastic
Joined
Nov 5, 2017
hi I've a old churchill cylindrical grinder.
I've been using it to grinder rubber rolls with a 12" aa grinding wheel.
Im facing a problem with the wheel from some days.
recently i need to change a worn out wheel to a new one.
when i fitted the new wheel , the outer face of the wheel is running out.
I've tried with 2 new wheels I'm getting the same problem.
can anyone help what should be done to rectify the problem.
 
Dress the wheel on the sides, make some pencil lines, half dozen around the faces of the wheel. After dresing, shut off wheel and check that all marks are gone. Assuming that the hub is tight, no crap in the wheel to hub face tct.
 








 
Back
Top