carnedude82
Plastic
- Joined
- Feb 20, 2018
The shop I work at recently purchased an old ELB grinder. We did't get any manuals or books with the machine and we are having trouble getting the table to feed back and forth automatically. The wheel will power feed in and out and up and down but as soon as we hit the switch that we can only assume is the table feed, a relay trips and we have to shut off the power to the wheel before it will move again. We don't know much about the working order of the machine before it was purchased so there is a chance something is broke. Kinda poking around in the dark and hope its just a dumb fix because we aren't pushing the right buttons.
