skipd1
Cast Iron
- Joined
- Jan 6, 2010
- Location
- Bismarck, ND
I have a Harig 6x12 and I am dry grinding a 1/4" channel into a 12" length of 3/4 inch 1045 ground rod. I have been taking about .00015 steps down and it seems that is about all the grinder and myself want to go. Seems that there is plenty of heat so I am going slow to final depth of about .0050 total. I am using a 6x1/4 inch Norton 46H wheel. Comments Please.
Thanks
Skipd1
Thanks
Skipd1