Kevin D
Aluminum
- Joined
- Feb 8, 2005
- Location
- Morrow, OH, USA
Stopped by a yard sale last week and found these little pliers/cutters. Thought they were most curious, with the cutters on the side, and compound levered as they are.
Around the center screw, on the nut side is stamped "Bernard-No 102- 4 1/2"
On the slotted screw side "New Haven Conn USA- ****Horn Co"
The jaws have cross hatching on the mating surface, the left one has a groove slightly off center, down the length. The wire cutters on the outside curve of the right jaw are cammed off the center pivot screw coming against the backside dike of the right jaw. Both jaws pivot off of their respective screws with slotted legs that slide through pins on the respective handles.
Thought you might enjoy these.
Around the center screw, on the nut side is stamped "Bernard-No 102- 4 1/2"
On the slotted screw side "New Haven Conn USA- ****Horn Co"
The jaws have cross hatching on the mating surface, the left one has a groove slightly off center, down the length. The wire cutters on the outside curve of the right jaw are cammed off the center pivot screw coming against the backside dike of the right jaw. Both jaws pivot off of their respective screws with slotted legs that slide through pins on the respective handles.
Thought you might enjoy these.