twin staged
Aluminum
- Joined
- Feb 8, 2011
- Location
- Medina, Ohio
Serial number 38701H1456. Bed looks to be in good order. Spindle sounds good. I think it's a taper bearing head. If it had a longer bed I would have already pulled the trigger.
Sight glass in the apron is present but destroyed. Is there a good way to check on the health of the worm gears and the oiling in there besides pulling it apart?
More or less curious what the serial number brings up. I'm assuming it's a hardened bed with the H. Interested in metric threading options.
Looks like the original motor but I couldn't get in there to see the tag. I'm assuming 5 hp.
Is there anything hendey weird about the d1 spindle that would make backing plates need anything?
Thanks
Sight glass in the apron is present but destroyed. Is there a good way to check on the health of the worm gears and the oiling in there besides pulling it apart?
More or less curious what the serial number brings up. I'm assuming it's a hardened bed with the H. Interested in metric threading options.
Looks like the original motor but I couldn't get in there to see the tag. I'm assuming 5 hp.
Is there anything hendey weird about the d1 spindle that would make backing plates need anything?
Thanks