blawless
Aluminum
- Joined
- Nov 30, 2013
- Location
- whitewater, montana
Hey guys, does the machine use a #12 Brown and Sharpe Taper, arbor?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
Milwaukee 3B Universal MM
- Thread starter blawless
- Start date
- Replies 3
- Views 1,116
johnoder
Diamond
- Joined
- Jul 16, 2004
- Location
- Houston, TX USA
You can read about him in here. Thanks to Greg Menke for scanning and hosting this 1917 pub for me
http://pounceatron.dreamhosters.com/docs/kt/kt-milwaukee-catalogue19-circa1917-port.pdf
Actually, it uses K&T's version of the B&S 12
Thumbnail is Scully Jones page from 1942
http://pounceatron.dreamhosters.com/docs/kt/kt-milwaukee-catalogue19-circa1917-port.pdf
Actually, it uses K&T's version of the B&S 12
Thumbnail is Scully Jones page from 1942
Attachments
blawless
Aluminum
- Joined
- Nov 30, 2013
- Location
- whitewater, montana
Once again, Many Thanks to you guys.
jhruska
Titanium
- Joined
- Jul 5, 2009
- Location
- Munster, In. USA
In the photos the size goes from 10, 11, 12, and 12 B&S taper.
The small 10 B&S has the K&T drive lugs and is marked K&T.
Any 12 B&S taper will fit. For heavy cuts the drive lugs prevent the arbor
from spinning in the taper. The draw bar will seat the taper for most work.
John
The small 10 B&S has the K&T drive lugs and is marked K&T.
Any 12 B&S taper will fit. For heavy cuts the drive lugs prevent the arbor
from spinning in the taper. The draw bar will seat the taper for most work.
John
