FS McCrosky Wizard collets + misc

I have 8 McCrosky Wizard model C collets I'd like to sell. 5 are #3 morse, 1 of which has had a piece of 1 1/2" round rod 7 1/2" long welded to it and bored as a special extended holder but I believe it could be cut back off right behind the weld (the taper socket would end up a tad shorter). The other 3 are #2 morse, 1 of which has a #2 morse ext sleeve stuck in it which I can't seem to remove (tang is worn too short to pop out). I'd like to get $10. ea but could do better if someone wanted them all. Buyer to pay actual shipping cost from 02330, no pkg - handling BS. I also aquired in the same lot a Scully Jones 16375 "Safe Torque" morse #3 male to morse #2 female, seems to be some sort of safety torque limiting device for tapping or drilling, not really sure. I'd like to get $20. for it. All are in good shape near as I can tell, not rusted or anything. Located in Carver, MA. Email me or if you'd rather Ph. 508-866-5840. Thank you, Jim Bishop.