- Joined
- Feb 27, 2007
- Location
- Massachusetts
These machines are located in the Denver Colorado area. I can e-mail photos.
The lathe is a LUX-CUT brand (looks like a jet) made in taiwan in 1979 hardened and ground ways, 10 x 36, power feeds, threading, 8 tpi lead screw, 60 to 1250 rpm, 110 or 220 single phase 1 horse motor, on a stand, has piston type tool holder and some extras. asking 1300.00.
Rockwell vertical knee mill 6 x 24 table, all new bearings including spindle. 220 3/4 horse 3-phase motor with teco westinghouse 1 horse power inverter to run from single phase power 370 to 5000 rpm, with vise and extras. asking
1300.00 also.
The lathe is a LUX-CUT brand (looks like a jet) made in taiwan in 1979 hardened and ground ways, 10 x 36, power feeds, threading, 8 tpi lead screw, 60 to 1250 rpm, 110 or 220 single phase 1 horse motor, on a stand, has piston type tool holder and some extras. asking 1300.00.
Rockwell vertical knee mill 6 x 24 table, all new bearings including spindle. 220 3/4 horse 3-phase motor with teco westinghouse 1 horse power inverter to run from single phase power 370 to 5000 rpm, with vise and extras. asking
1300.00 also.