Please help with Charmilles Robofil 230

WEDMServices · Jan 25, 2007

In the lower head there are 4 seals between the chopper side and the timing belt side. Does anyone have any experience with changing these seals? It seems there is a tool necessary for removal of old seals. Any thoughts are welcome !!
Thanks in advance

chino-71-zx · Jan 30, 2007

Have you tried calling Charmilles Technologies? Tech Support is free when you own a Charmilles Machine.

BrianH · Jan 30, 2007

They keep a owner registry for every machine, no matter how old. If you buy it used you need to call Charmilles and have info updated. Then they will help you/sell you parts, etc.

Jay Cee · Jan 31, 2007

There is a tool put you don't need it. Something about turning the shaft around and using the other end to knock it out... I don't have it apart right now and can't visualize what you need to take apart. Does the shaft bit make sense?

Search

Largest Manufacturing Technology Community on the Web

Search

Please help with Charmilles Robofil 230

WEDMServices

Plastic

chino-71-zx

Plastic

BrianH

Cast Iron

Jay Cee

Hot Rolled

Similar threads