SMW Precision
Plastic
- Joined
- Nov 14, 2006
- Location
- Spokane, Washington
I have been interested in the EDM process for several years and a machine became available. Of course it is a 1966 version with a PS2 Power supply. Machine shows less than 5,000 hours of operation. In nice condition though ready for a good clean, oil and reset. A desirable accessory came with the machine a Rotobore Unit. I am not planning on normal usage though I have some projects and prototypes that are only practical using an EDM.
While I received extensive documentation with the machine; missing is the Operation & Setup Manual. While I can fake it; if someone has a D1-S ops manual I would appreciate a copy, please contact me. I do have an extra original D1-S operator training manual if some one has a need.
Thanks,
Ken
While I received extensive documentation with the machine; missing is the Operation & Setup Manual. While I can fake it; if someone has a D1-S ops manual I would appreciate a copy, please contact me. I do have an extra original D1-S operator training manual if some one has a need.
Thanks,
Ken