Linda
Plastic
- Joined
- Oct 7, 2004
- Location
- Mesa, Arizona
We recently purchased a Charmilles D1S and now it needs to get moved. The machine is 7'H x 2'W x 4'L. I think the heaviest part is in the base section. The holes on the side of the base are forklift points. There are no slots in the base.
The seller can load it into a trailer for us, but we need to find a way to get it off the trailer and into our shop. We plan on renting a flat drop trailer to get the machine as close to the ground as we can and then using a come-along to pull it out. Is this a good idea? Or are we better off getting a forklift to move it? What's a safe way to move it once we get it on concrete?
Thanks!
The seller can load it into a trailer for us, but we need to find a way to get it off the trailer and into our shop. We plan on renting a flat drop trailer to get the machine as close to the ground as we can and then using a come-along to pull it out. Is this a good idea? Or are we better off getting a forklift to move it? What's a safe way to move it once we get it on concrete?
Thanks!
