What's new
What's new

Hurco Ultimax Software

TomM

Plastic
Joined
Mar 11, 2003
Location
Austin, TX
I recently bought a 93 Hurco Km? cnc machine with the dual screens and loaded Ultimax software with 4 axis.

The machine had a remote terminal that would allow for programming while the machine was running. This remote terminal was stolen.

I would like to load my PC with the same software and do the same.

I am not aware of any way to copy the software over from the machine.

Any suggestions?

Tom
 
Tom
You are lucky to have such a nice machine!
You could call Hurco and ask them if they can do anything for you. you will have to tell them the prior owner and serial number etc.
Many "DNC" programs are available to talk to the Hurco, although they only do it in "G" code and that prevents the 2 nd sceen from functioning.
The Ultimax software stays conversational of course, when used with a dedicated PC.
Did you look at Hurcos web site and the WinMax info ?

Sorry O don't have any more. I am still trying to get my Hurco Kmb3 to talk G code..
 








 
Back
Top