Konrad
Cast Iron
- Joined
- Feb 17, 2003
- Location
- Edmonton Alberta Canada
My only one CNC is down since Monday and the Electrician thinks it is from
a Power Bump or search!
It just didn't want to start up and there is a solid white bar across the screen about 6-8" wide with black on top and bottom.
What the Electrician did so far is, he exchanged the CPU - Board....no luck!
Then he send the main Power supply Board to the US for repair ....no luck!
So I was wondering if someone else had the same problem on there Maho with 432 Phillips Control,showing a white solid bar!
Thanks, Konrad
a Power Bump or search!
It just didn't want to start up and there is a solid white bar across the screen about 6-8" wide with black on top and bottom.
What the Electrician did so far is, he exchanged the CPU - Board....no luck!
Then he send the main Power supply Board to the US for repair ....no luck!
So I was wondering if someone else had the same problem on there Maho with 432 Phillips Control,showing a white solid bar!
Thanks, Konrad
