outbackmachinist
Plastic
- Joined
- May 17, 2004
- Location
- eugene,or usa
Am looking for a used facing tool holder in good shape. It will go to a QT15 w/8D turret.
Essential specifications are:
Bottom Tab: 38 mm wide x 7.5 mm deep
Hold-down-bolt Pattern: 94 mm across x 60 mm in alignment with tool length.
Tool Slot for ¾” tools.
I do not have the MAZAK Operating Manual that lists the part number for this tool holder but pg. 4-33 of the TechLeader catalogue lists the Mazak Part Number as: 51468002102.
Thank you for your review of this and any help that you may offer.
Essential specifications are:
Bottom Tab: 38 mm wide x 7.5 mm deep
Hold-down-bolt Pattern: 94 mm across x 60 mm in alignment with tool length.
Tool Slot for ¾” tools.
I do not have the MAZAK Operating Manual that lists the part number for this tool holder but pg. 4-33 of the TechLeader catalogue lists the Mazak Part Number as: 51468002102.
Thank you for your review of this and any help that you may offer.