Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
8N Q-turn to integrex
- Thread starter ssturnin
- Start date
- Replies 2
- Views 1,179
Integrexman
Aluminum
- Joined
- Jun 4, 2006
- Location
- Oklahoma City
If the Integrex is a series I or II the lathe work is the same as a T-PLUS control and the newer FUSION. The Mark III Integrex with the 640mtPRO control programs lathe work a little different but it is alot better. The MATRIX control is similar to the PRO with a several changes. Mill work is the same on series I, II, and III. Matrix mill work is more like the mills now. The biggest differents for lathe work is you don't use numbers for the tool in each unit. They use the tool description like "GNL OUT A" for a turning tool.
Checkout this site for more info on Intgrex machines. http://integrexmachinist.com/
Checkout this site for more info on Intgrex machines. http://integrexmachinist.com/
