FJV_25

THE MAINT. MAN · Apr 17, 2007

I am having a problem with the tool changer on my FJV-25, when it cycles around it occasionally makes a high pitch noise,like a brake is applied,
and it intermittenly sputters as if it was binding.Has anyone encountered this, if so how was it corrected.

T

Bobw · Apr 17, 2007

I've got an FJV-20 apart right now, the casting that hold the carousel broke and the whole thing fell out of the machine. So I can tell you there is a big, rather expensive looking bearing in there.

I've also had the squeel problem, it was after hosing the machine down after doing some wood parts(there was wood chips everywhere). I just spayed about half of can of Kroil up in there, and it worked its way in, and never had a problem since, that is until the whole carousel fell out of the machine.

THE MAINT. MAN · May 1, 2007

yeah, i just blew out chips, and unloaded a can of WD-40 around the base and it worked in...I noticed that if the tool changer doesn't get cycled around regularly the coolant will gum and cause this.

Search

Largest Manufacturing Technology Community on the Web

Search

FJV_25

THE MAINT. MAN

Plastic

Bobw

Diamond

THE MAINT. MAN

Plastic

Similar threads