Northern
Aluminum
- Joined
- Jan 3, 2008
- Location
- Central New Jersey, USA
Hi,
2002 SL-10 (This is the older style, monochrome monitor)
With the machine powered up, running in cycle, or at idle, there is a small "pulsing" that is going on in the monitor. It looks like the entire screen is trying to shink from the center by about 1/32". It doesn't effect operation, everything is still clear, but it's enough to make you think that you've had a beer on the job.
This has been a recurring problem that seems to solve itself every few months. The way i get a temporary fix is to unplug the monitor and plug it back in. Problem goes away for a little while, but comes back eventually.
We're not located in a region prone to earthquakes either.
Thank you, Jeff.
2002 SL-10 (This is the older style, monochrome monitor)
With the machine powered up, running in cycle, or at idle, there is a small "pulsing" that is going on in the monitor. It looks like the entire screen is trying to shink from the center by about 1/32". It doesn't effect operation, everything is still clear, but it's enough to make you think that you've had a beer on the job.
This has been a recurring problem that seems to solve itself every few months. The way i get a temporary fix is to unplug the monitor and plug it back in. Problem goes away for a little while, but comes back eventually.
We're not located in a region prone to earthquakes either.
Thank you, Jeff.