Claven2
Cast Iron
- Joined
- Apr 28, 2008
- Location
- Ottawa, Canada
I need to go from 220v 1 phase in my shop to 220v 3ph to power the following motor:
Reliance Electric
3/4hp, 220v, 3ph
NEMA 56 frame
1725 @ 60Hz
Reversible, continuous duty
Looking to do it with a VFD for flexibility reasons as opposed to a static converter. It should be a Siemens drive b/c I can get that brand at cost through work.
Can anyone help out? Looking for something easy and not too complex for my HMS application, as I'm a VFD neophyte
The application is a South Bend 9A lathe. Hoping to use the original control switch to run the VFD control circuitry, my lathe has push-button control as opposed to a drum switch, if that matters.
Reliance Electric
3/4hp, 220v, 3ph
NEMA 56 frame
1725 @ 60Hz
Reversible, continuous duty
Looking to do it with a VFD for flexibility reasons as opposed to a static converter. It should be a Siemens drive b/c I can get that brand at cost through work.
Can anyone help out? Looking for something easy and not too complex for my HMS application, as I'm a VFD neophyte
The application is a South Bend 9A lathe. Hoping to use the original control switch to run the VFD control circuitry, my lathe has push-button control as opposed to a drum switch, if that matters.