Don_Hartman
Hot Rolled
- Joined
- Jun 1, 2008
- Location
- Cincinnati,Ohio
I was trying to conect a Furnas Drum switch to the motor on my lathe.
But Found the switch to have a missing contact and another one badly arced.
So I have purchased another switch.This switch is a Square-D Class 2601 AG-1.
My motor is a Toshiba and I will be running it on 120V.
Peter(peter5322)posted a nice drawing of the motors internals.
And here is the motor plate
I have a picture of the switches diagram also.
I do not understand what wires go where on the new switch.
Thanks for any help
Don
But Found the switch to have a missing contact and another one badly arced.
So I have purchased another switch.This switch is a Square-D Class 2601 AG-1.
My motor is a Toshiba and I will be running it on 120V.
Peter(peter5322)posted a nice drawing of the motors internals.
And here is the motor plate
I have a picture of the switches diagram also.
I do not understand what wires go where on the new switch.
Thanks for any help
Don
