chip_maker
Stainless
- Joined
- Jan 14, 2006
- Location
- Moira, NY USA
I keep getting intermittent servo error too large (alarms 103,104,105) in all three axes on my 97 vf-2.
when i hold the jog button the chosen axis will stutter (speed up, slow down, skip) and then finally alarm out.
any ideas on what the problem may be?
I highly doubt all 3 servo amps are toast. could it be the servo distribution power supply? It has wires going to all three servo amps and I'm getting problems in all thre axes.
I'm a mechanical kind of guy & all this electronic stuff is greek to me.
any help would be greatly appreciated.
Oh yeah, I have checked all the connections and reseated the plugs, this seems to help for a little while.
when i hold the jog button the chosen axis will stutter (speed up, slow down, skip) and then finally alarm out.
any ideas on what the problem may be?
I highly doubt all 3 servo amps are toast. could it be the servo distribution power supply? It has wires going to all three servo amps and I'm getting problems in all thre axes.
I'm a mechanical kind of guy & all this electronic stuff is greek to me.
any help would be greatly appreciated.
Oh yeah, I have checked all the connections and reseated the plugs, this seems to help for a little while.
