hrhoward
Plastic
- Joined
- Feb 2, 2007
- Location
- Huntsville, AL
Hello,
I recently got a Haas VF-0E up and going. It had been in a government storage facility for several years (mfg in 1998, less than 2500 hours in operation).
http://www.practicalmachinist.com/vb/showthread.php/alarm-122-and-176-194496.html
I can repair CNC machines but do not consider myself a machinist by any means. I found on here the programs for warming up and running in the spindle. What I would like is a program to do the same for the axis' (X,Y, and Z). Perhaps something like a figure eight with progressive speed increases.
I have done a couple of quick searches for it but couldn't find anything except a mention of it.
Does anyone have such a program they could send me so I can download it to a floppy and upload it?
Thanks!!!
H. Howard
I recently got a Haas VF-0E up and going. It had been in a government storage facility for several years (mfg in 1998, less than 2500 hours in operation).
http://www.practicalmachinist.com/vb/showthread.php/alarm-122-and-176-194496.html
I can repair CNC machines but do not consider myself a machinist by any means. I found on here the programs for warming up and running in the spindle. What I would like is a program to do the same for the axis' (X,Y, and Z). Perhaps something like a figure eight with progressive speed increases.
I have done a couple of quick searches for it but couldn't find anything except a mention of it.
Does anyone have such a program they could send me so I can download it to a floppy and upload it?
Thanks!!!
H. Howard