viper
Titanium
- Joined
- May 18, 2007
- Location
- nowhereville
Already in the red here and fighting with a rotary connectivity problem. Brush 14 pin rotary is being hooked to a brushless Haas with DC or brush output for the rotary with 17 pins. We have repinned the connector per Haas specs. They cannot figure this out. Rotary somewhat turns but will try to quiver when you try and jog it, and will not home. I am doing some very simple parts and just need the thing to index. Needing to work with this from the encoder level to see where to issue is. I have a 3ch encoder with A, B, and Z channels.