AtlAttCo
Plastic
- Joined
- Apr 15, 2010
- Location
- Georgia, USA
HAAS VF-2/4 Machines
Wondering if these are capable of doing a block skip. On my FADAL machines, I can place a "/" in front of any line in the program and flip the Block Skip switch to the on position and it will not read those particular lines. I use this to run a first article when using several fixtures (that way I only run one vise).
Thanks
Wondering if these are capable of doing a block skip. On my FADAL machines, I can place a "/" in front of any line in the program and flip the Block Skip switch to the on position and it will not read those particular lines. I use this to run a first article when using several fixtures (that way I only run one vise).
Thanks