The remote jog pendant on our 2007 VF7 started coming apart - the plastic holding the hand wheel in place snapped off. So we ordered a new one.
Jeffreys sent a newer version (extra $250) because the old style with the micro switch in the holster has been discontinued.
The instructions say little more than "mount the holster and install the pendant". No mention of firmware requirements or what to do about the lack of a connector for the micro switch. The service department at Jeffreys said they had no more information than what came with the new remote.
Of course it doesn't work. After powering up the machine, the first time I lift the remote its screen will light up for two seconds and then go blank. Replace the remote, lift it again, nothing. Shut down and restart the machine, same thing.
Has anyone replaced a remote and experienced a similar problem?
Doug
Jeffreys sent a newer version (extra $250) because the old style with the micro switch in the holster has been discontinued.
The instructions say little more than "mount the holster and install the pendant". No mention of firmware requirements or what to do about the lack of a connector for the micro switch. The service department at Jeffreys said they had no more information than what came with the new remote.
Of course it doesn't work. After powering up the machine, the first time I lift the remote its screen will light up for two seconds and then go blank. Replace the remote, lift it again, nothing. Shut down and restart the machine, same thing.
Has anyone replaced a remote and experienced a similar problem?
Doug