Bawl'n Bluetick
Plastic
- Joined
- Mar 23, 2006
- Location
- east coast
Is there a parameter that could be changed so that the tool always goes back into the same pocket number?
For instance, tool 1 is always in pocket 1, tool 7 would always be in pocket 7 etc.
The machine is a VF-1 with a side mount tool changer.
Thanks.
For instance, tool 1 is always in pocket 1, tool 7 would always be in pocket 7 etc.
The machine is a VF-1 with a side mount tool changer.
Thanks.