knot2swift
Plastic
- Joined
- Aug 5, 2007
- Location
- Calgary, Alberta, Canada
Only once have I seen a parameter changed so that the old Haas machines do not display each engrave sub routine as it flashes on the screen. Mine unfortunately is stuck in this mode.
I would prefer to change that so that operators can see the entire G47 line plus see what the machine is going to next once done engraving rather than a bunch of meaningless stuff flashing by.
Has anyone done this besides Greg who I worked with 7 years ago? At the time his machine was stuck in the same mode as mine is now. Wanting to get his machine from displaying useless macros. He looked over my machines parameters and made the change.
I hope someone is gifted enough to know Haas Mills so well, they can provide me the info. I suspect it's in the Common Parameter 57 Group.
Happy New Year to all.
I would prefer to change that so that operators can see the entire G47 line plus see what the machine is going to next once done engraving rather than a bunch of meaningless stuff flashing by.
Has anyone done this besides Greg who I worked with 7 years ago? At the time his machine was stuck in the same mode as mine is now. Wanting to get his machine from displaying useless macros. He looked over my machines parameters and made the change.
I hope someone is gifted enough to know Haas Mills so well, they can provide me the info. I suspect it's in the Common Parameter 57 Group.
Happy New Year to all.
