larrysmachine
Plastic
- Joined
- Apr 19, 2011
- Location
- Louisiana
Hi guys, I am cutting threads using the IPS on the TL2. The problem is that no matter what I put in for thread depth the machine will not take anything less than .006 per pass, it will take more but not less. I have even changed the depth in the G code. Is there a setting in the control that is doing this? I am cutting 1.75-4UNR .03R on the nose of the insert and that is a pretty heave cut. Thanks for any help. I would call HAAS but I am doing this job the weekend.
Larry
Larry