RJ Martin Design
Plastic
- Joined
- Feb 4, 2011
- Location
- Bridgewater, MA
My son is working on a simple HAAS lathe program and it's not working out well for him.
He's trying to cut a step gage, with 1", 2" and 3" diameters, each step is 1" long
He has this:
G28
T101
G50S2500
S800 M03
G0 X0.1 Z0.1
G71 P11 Q18 U0.05 W0.05 D0.05 F0.02
N11 G00 X0.0 Z0.1
N12 G01 Z0.0 F0.02
X1.0
Z-1.0
X2.0
Z-2.0
X3.0
Z-3.0
Z0.1
N18 G00 Z0.2
N19
N0 G70 P11 Q19
M05
G28
It appears to make the part "backwards" when he runs it in the controller.
Any help greatly appreciated.........
Thanks,
RJ Martin
He's trying to cut a step gage, with 1", 2" and 3" diameters, each step is 1" long
He has this:
G28
T101
G50S2500
S800 M03
G0 X0.1 Z0.1
G71 P11 Q18 U0.05 W0.05 D0.05 F0.02
N11 G00 X0.0 Z0.1
N12 G01 Z0.0 F0.02
X1.0
Z-1.0
X2.0
Z-2.0
X3.0
Z-3.0
Z0.1
N18 G00 Z0.2
N19
N0 G70 P11 Q19
M05
G28
It appears to make the part "backwards" when he runs it in the controller.
Any help greatly appreciated.........
Thanks,
RJ Martin