Rockwell lathe help
Posted 11-05-2009 at 04:17 PM by zekemed
I have a Delta/Rockwell 14" lathe with QC gear box and variable speed drive. I would like to be able to cut metric threads but don't know if it is possible on my lathe. It has a 16 (or 32) tooth stud gear, two 45 tooth idler gears meshing with a 32 tooth gear on the screw. I'm a newbie home shop machinist, so I need lots of help. Thanks in advance for any that you can provide.
Total Comments 1
Comments
|
You are posting questions in the Blog section. If you would like real live lookers and responders, repost by starting a new topic in an appropriate section of the forum.
|
Posted 11-05-2009 at 06:32 PM by johnoder
|
Recent Blog Entries by zekemed
- Rockwell lathe help (11-05-2009)
