Hardinge hlv-h (kl-1) tailstock bearing
Close
Login to Your Account
Results 1 to 4 of 4
  1. #1
    Join Date
    Dec 2017
    Country
    GREECE
    Posts
    11
    Post Thanks / Like
    Likes (Given)
    3
    Likes (Received)
    0

    Default Hardinge hlv-h (kl-1) tailstock bearing

    The bearing on my kl-1 needs replacment .
    Do you happen to know the type of the tailstock spindle bearing ?
    As i know hlv-h is same machine with kl-1 so supose same bearings.
    Cant find a similar bearing with snap ring at google with these dimensions ... 14,28mm=9/16in ID , 35mm OD , 15,85mm depth.
    The ID seems to be imperial but the OD metric .

    Any help please ??

    Kostas.

  2. #2
    Join Date
    Feb 2006
    Country
    UNITED STATES
    State/Province
    Indiana
    Posts
    12,027
    Post Thanks / Like
    Likes (Given)
    454
    Likes (Received)
    3198

    Default

    The Hardinge part number is CP0004140. It is probably a special item because of the snap ring, so the most likely source is direct from Hardinge. Possibly a rebuilder of Hardinge machines may stock it.

    It may be possible to find the same size bearing without the snap ring groove and machine the groove yourself.

    I looked at the DV-59 parts list and see it uses bearing number VD0004140, which must be different.

    Larry

  3. Likes cupra liked this post
  4. #3
    Join Date
    Jul 2007
    Country
    UNITED KINGDOM
    Posts
    4,298
    Post Thanks / Like
    Likes (Given)
    2026
    Likes (Received)
    1825

    Default

    Note that 9/16"==14.29mm ID, 1 3/8"==34.93mm OD, 7/16"==11.11mm width is a standard imperial single row bearing size.

    I can't find double row or snap ring bearings in the larger width from my suppliers, but you might be able to make a spacer with a snap ring groove that would work with the standard ball bearing. I thought that the tailstock beading was a double row bearing, the same as the leadscrew bearing, but I might be wrong!

    These are the suppliers I use in the UK
    Bearing Boys
    Simply Bearings

    No connection other than as a customer.

  5. #4
    Join Date
    Dec 2017
    Country
    GREECE
    Posts
    11
    Post Thanks / Like
    Likes (Given)
    3
    Likes (Received)
    0

    Default

    Quote Originally Posted by Mark Rand View Post
    Note that 9/16"==14.29mm ID, 1 3/8"==34.93mm OD, 7/16"==11.11mm width is a standard imperial single row bearing size.

    I can't find double row or snap ring bearings in the larger width from my suppliers, but you might be able to make a spacer with a snap ring groove that would work with the standard ball bearing. I thought that the tailstock beading was a double row bearing, the same as the leadscrew bearing, but I might be wrong!

    These are the suppliers I use in the UK
    Bearing Boys
    Simply Bearings

    No connection other than as a customer.
    I have seen this type of bearing 1622-2RSNR but the OD on the tailstock screw shaft is 35mm , 1 3/8 is very close but i dont think it will be possible to fit in the screw shaft.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •