Steve@610Euro
Plastic
- Joined
- Oct 6, 2010
- Location
- PA, USA
i bought this mill off of a gunsmith. he really had no idea what to do with it and didnt know what was wrong with it. while i was there taking it apart to transport it to my shop, found water all in the machine. the rubber line the electrical wires were in was filled with water, the spindle housing was filled with water, the base of the machine was also filled with water. after seeing all this he decides to admit the whole building and the machine were in a bad flood. the machine was cheap so i wasnt too worried about it.
the machine is now in my shop back together. spindle spins free, no issues there, new belt and replaced a few other pieces that were broken which the guy never told me about.
my issue now is, when turned on the motor only hums. it doesnt spin at all. you can spin the motor freely by hand so its not locked up.
here is how it is currently wired through a 250V outlet. on the fuse box end thats 2 - 50 A posetive fuses. motor wires have metal labels from 1-9, all the wires are black.
this is the cover for the motor.
any help would be appreciated. id really like to get this thing up and running as soon as possible.
the machine is now in my shop back together. spindle spins free, no issues there, new belt and replaced a few other pieces that were broken which the guy never told me about.
my issue now is, when turned on the motor only hums. it doesnt spin at all. you can spin the motor freely by hand so its not locked up.
here is how it is currently wired through a 250V outlet. on the fuse box end thats 2 - 50 A posetive fuses. motor wires have metal labels from 1-9, all the wires are black.
this is the cover for the motor.
any help would be appreciated. id really like to get this thing up and running as soon as possible.