That link is now broken
. However, using more google-fu, here is how to get feed rate to output on every line..
Find this portion in your post file:
plinout #Output to NC of linear movement - feed
pcan1, pbld, n$, sgfeed, sgplane, `sgcode, sgabsinc, pwcs, pccdia,
pxout, pyout, pzout, pcout,
feed, strcantext, pscool, e$
#Modify following line to customize output for high-speed toolpath
#tool inspection/change points
if rpd_typ$ = 7, pbld, n$, "M00", "(TOOL INSPECTION POINT - POST CUSTOMIZATION REQUIRED)", e$
pcirout #Output to NC of circular interpolation
pcan1, pbld, n$, `sgfeed, sgplane, sgcode, sgabsinc, pwcs, pccdia,
pxout, pyout, pzout, pcout, parc,
feed, strcantext, pscool, e$
Add an * to the highlighted portion to achieve this:
plinout #Output to NC of linear movement - feed
pcan1, pbld, n$, sgfeed, sgplane, `sgcode, sgabsinc, pwcs, pccdia,
pxout, pyout, pzout, pcout,
*feed, strcantext, pscool, e$
#Modify following line to customize output for high-speed toolpath
#tool inspection/change points
if rpd_typ$ = 7, pbld, n$, "M00", "(TOOL INSPECTION POINT - POST CUSTOMIZATION REQUIRED)", e$
pcirout #Output to NC of circular interpolation
pcan1, pbld, n$, `sgfeed, sgplane, sgcode, sgabsinc, pwcs, pccdia,
pxout, pyout, pzout, pcout, parc,
*feed, strcantext, pscool, e$