Post processor Solidcam for Robodrill Fanuc 16 mb and motion issue!

poxino · May 4, 2018

Hello there ,

I am looking for a Solidcam post processor , for my Robodrill with Fanuc 16mb control.

I am also having issues with the motion of the machine , as it 's smooth between arcs to arcs , but not smooth at all between arcs and lines , even at slow feed rates 20IPM...
This happens especially when using imachining.

I have been trying to sort this out for 4 weeks now! :confused:

Any suggestion?

Kaszub · May 4, 2018

Does your control support following G-codes G05 G08?
Use them you will see your machine move smooth as silk.

poxino · May 5, 2018

Kaszub said:
Does your control support following G-codes G05 G08?
Use them you will see your machine move smooth as silk.

Machine supports g08 , but is not making any difference motion wise

Kaszub · May 5, 2018

Have you tried any generic Fanuc posts OM for example.... from the list is that issue with all of them?
Few posts from past.
http://www.practicalmachinist.com/vb/cnc-machining/fanuc-hsm-g08-g05-1-settings-171099/

http://www.practicalmachinist.com/vb/cnc-machining/fanuc-oimc-hsm-g05-1-g08-158264/

http://www.practicalmachinist.com/vb/cnc-machining/how-use-high-speed-functions-g08-g05-1-a-169465/

Search

Largest Manufacturing Technology Community on the Web

Search

Post processor Solidcam for Robodrill Fanuc 16 mb and motion issue!

poxino

Aluminum

Kaszub

Hot Rolled

poxino

Aluminum

Kaszub

Hot Rolled

Similar threads