Hello,
This is my first post... I'm liquidating my grandfather/father's shop in NE Philadelphia. I have only conventional machines left and I know the folks on this site can appreciate them. Short listing:
Kearney Trecker 2CH Horizontal with slotting attachment and vertical head (2 phase)
Kearney Trecker 3CK Vertical
Cincinnati 2MI Horizontal
Cincinnati 520-15 Horizontal with vertical head
Pratt & Whitney 16x30 Model C (I believe) with steady rest, follow rest, 3 & 4-jaw chucks (2 phase)
Small Nichols Miller with vertical head
Leblond Regal 22 x 36 with steady rest, 3 and 4 jaw chucks (2 phase)
Lodge & Shipley Standard 25" with steady rests, chucks, face plates, etc. (2 phase)
Kellenberger 10 x 40 Universal grinder with swing around ID; hydraulic traverse
Kellenberger 10 x 40 Universal grinder with swing around ID; mechanical traverse
Several Heald 72A and 74 ID grinders up to 40" swing
Heald 261 rotary surface grinder 16" chuck
Landis 20 x 96 OD grinder (2 phase)
Ribon 10 x 40 ID/OD grinder
Several tool grinders and tons of tooling.
Note that some of these machines are 2-phase (not split-phase). I have some transformers that change from 3-phase 240vac to 220vac 2-phase that can go with machines.
I can load most of these onto a truck or trailer free of charge.
Please ask questions, and/or let me know if you're interested.
Thanks!
Jim
This is my first post... I'm liquidating my grandfather/father's shop in NE Philadelphia. I have only conventional machines left and I know the folks on this site can appreciate them. Short listing:
Kearney Trecker 2CH Horizontal with slotting attachment and vertical head (2 phase)
Kearney Trecker 3CK Vertical
Cincinnati 2MI Horizontal
Cincinnati 520-15 Horizontal with vertical head
Pratt & Whitney 16x30 Model C (I believe) with steady rest, follow rest, 3 & 4-jaw chucks (2 phase)
Small Nichols Miller with vertical head
Leblond Regal 22 x 36 with steady rest, 3 and 4 jaw chucks (2 phase)
Lodge & Shipley Standard 25" with steady rests, chucks, face plates, etc. (2 phase)
Kellenberger 10 x 40 Universal grinder with swing around ID; hydraulic traverse
Kellenberger 10 x 40 Universal grinder with swing around ID; mechanical traverse
Several Heald 72A and 74 ID grinders up to 40" swing
Heald 261 rotary surface grinder 16" chuck
Landis 20 x 96 OD grinder (2 phase)
Ribon 10 x 40 ID/OD grinder
Several tool grinders and tons of tooling.
Note that some of these machines are 2-phase (not split-phase). I have some transformers that change from 3-phase 240vac to 220vac 2-phase that can go with machines.
I can load most of these onto a truck or trailer free of charge.
Please ask questions, and/or let me know if you're interested.
Thanks!
Jim