I have got a job coming up that is going to require machining out some very large pockets in big stainless steel plate up to 3/4" deep. Going to remove roughly 200 pounds of material if my Inventor model is correct, so naturally I am looking for some good endmill choices. I have always been a big fan of Niagara Stabilizer endmills but thought I would look what other options are available.
I remember at the IMTS show walking through the tooling building and the guy from the Destiny Tool "attacked" me to get me to come to his booth, so naturally I was skeptical but after looking at his endmills there and taking a catalog I am curious as to what they can do, particulalry for this job. Was just curious if anyone has ever run the Raptor DVH or Raptor 3/6 endmill?
Destiny Tool
I remember at the IMTS show walking through the tooling building and the guy from the Destiny Tool "attacked" me to get me to come to his booth, so naturally I was skeptical but after looking at his endmills there and taking a catalog I am curious as to what they can do, particulalry for this job. Was just curious if anyone has ever run the Raptor DVH or Raptor 3/6 endmill?
Destiny Tool