What's new
What's new

Hitachi Spindle

ISHY

Aluminum
Joined
Oct 29, 2008
Location
UK
Just got a Hitachi Seiki HT20 S11, got it installed, cleaned up and levelled, had the spindle running and turret moving, everything ok. Today I interfaced it with my computer via RS 232 and after a bit of a battle got that working. Tried a dry run a programme and no go, an alarm came up mentioning the door switch and spindle, door switch is fine so I tried to run the spindle up again and no go it alarms every time. I checked the chuck was closed and the key was set to the correct position (external) and that the hydraulics were working. I also checked the sensors on the back of the spindle and they are working fine.
Any ideas?
Ishy.
 








 
Back
Top