Hello, I've taken ownership of a Bridgeport VMC 600 with Heidenhain TNC 370.
I'm having an issue with getting it to complete the traverse action during start up.
After a logo, the screen comes up with "power interrupted" and pressing CE moves the screen onto the traverse axis setup, following the instruction manual I should press the button to turn on the control followed by the cycle start button.
However, when I press these buttons nothing happens, no clicks, no beeps, no movement, nothing.
The first time I used the machine today it went fine and started just as expected. Only after starting it for the second time I can't get it to work.
Any ideas?
I'm having an issue with getting it to complete the traverse action during start up.
After a logo, the screen comes up with "power interrupted" and pressing CE moves the screen onto the traverse axis setup, following the instruction manual I should press the button to turn on the control followed by the cycle start button.
However, when I press these buttons nothing happens, no clicks, no beeps, no movement, nothing.
The first time I used the machine today it went fine and started just as expected. Only after starting it for the second time I can't get it to work.
Any ideas?