What's new
What's new

Need help! Nakamura tome TMC15M FANUC OT A parameter lost

roymanvega

Plastic
Joined
Aug 6, 2012
Location
Phillipines
hello friends i Need Help.. We lost parameters of our NC lathe machine during change of keypad.. we dont have any datasheets, backup parameters. We lost all them during our country hit by typhoon (Phillipines) Any help we really appreciated!

Model: Nakamura Tome TMC15M Lathe Serial: R12705 yr 1989
Control: Fanuc OT-a
Software ver: 669-07
Servo ver: 9046-B
PMC: M028-01 (everytime i enabled parameter 905 the machine RED led alarm light on, im not sure how many steps its ladder or its version "M or L"..)

No alarm displayed on crt, machine led alarm light on. Then control stay on boot screen

Hardwares: MainBoard A20B-2000-017, Memory: A16B-2201-0101/07A, I/O CARD: A16B-1212-0220/02A, SERIAL AXES 1-2: A16B-2200-0391/118.

Servo/Spindle AMFLIFIER: PSM A06B-6077-H11, SPINDLE AMF.MODULE: A06B-6082-H211, SERVO AMF.MODULE: A06B-6079-H206

SERVO MOTORS: X A3/3000 A06B-0123-B075, Z A6/2000 A06B-0127-B075
SPINDLE MOTOR: AC3 5,5 4500rpm A06B-0843-B902 w/ separate position coder (im not sure if this is serial spindle)

I try to put basic parameters from 900-910 and load some 300-700's parameters according to the parameter manual that mr. al_the_man, we eliminate all errors/alarm but the machine stay on boot screen "not ready" and machine LED alarm turn on. please help us we know that this machine almost 22years but with your expert help this machine will pump again and cut some metal works...


Any help would be greatly appreciated
 








 
Back
Top