What's new
What's new

okuma lc10 slide table recondition, need help

bencho

Plastic
Joined
Mar 13, 2007
Location
malaysia
i need to recondition the okuma lc10 machine slide unit for tool holder, as the slide unit are badly worn off, especially on machine body portion, but the slide table was built on the chassis and not detachable, so, how can i probably grind it to make it flat again?
 
Option1: Put the machine on a huge grinding machine.

Option2: Build a grinding construction.

Option3: Put the machine on a horizontal boring mill, and use it as a grinder.

Option4: Learn how to scrape.

Option5: Mill off the table on the boring mill and make a mountable one :D

Option6: extend your chuck or turret so it wont use the worn out part of your table, and adjust play on the part thats left, adjust endswitchs aswell.

Lots of other options,

Goodluck

Oh and btw, 99% of all machines have the guides on the casting, is the guideway worn too much,(warpage or trough the hard layer), the casting(read machine) is scrape.
 
hi, thanks & appreciate for yours opinions. i believe that i will use the option 2, i will study on it 1st, then will get back to u soon. Appreciate if some one can lead me to the most effective way to solve this problem.

thanks
 








 
Back
Top