thewildbills
Plastic
- Joined
- Sep 18, 2017
- Location
- Monroe
Hi, New to the forum and not sure if I am posting in the correct area. Just let me know and I will try to fix it.
Here is my problem,
I have a Daewoo Puma 6 with a Fanuc 3tf control. Spindle drive is a A06B-6044-H009. Problem is that when I try to put the machine in gear it will alarm the spindle drive out as soon as I hit the button. It will not allow me to MDI a M41 either. It does nothing at all when I do that. It pulls a alarm 12 on the spindle drive. Not sure what is going on or how to fix it. I have a guy I go to for all my board issues and he looked over the main board and says eveything looks good. Just looking for some help and if there is anything else that is needed just let me know.
Thanks
Here is my problem,
I have a Daewoo Puma 6 with a Fanuc 3tf control. Spindle drive is a A06B-6044-H009. Problem is that when I try to put the machine in gear it will alarm the spindle drive out as soon as I hit the button. It will not allow me to MDI a M41 either. It does nothing at all when I do that. It pulls a alarm 12 on the spindle drive. Not sure what is going on or how to fix it. I have a guy I go to for all my board issues and he looked over the main board and says eveything looks good. Just looking for some help and if there is anything else that is needed just let me know.
Thanks