JimGlass
Stainless
- Joined
- Jan 15, 2003
- Location
- Genoa, Illinois
I'm turning grooves in a 3/16 dia workpiece that is kinda long. I would like to have a short dwell at
the bottom of the groove. I thought I could add #250 to the code thinking the tool would remain at the bottom of the groove for a few milliseconds before retracting but it does not work.
When Mach 3 sees the first line with the #250 it stops and says there needs to be an equal sign.
Where does the equal sign need to be? I tried to add the equal sign like this #=250 or =#250 but Mach3
still does not accept the code.
This should be an easy fix but I'm lost.
Jim
the bottom of the groove. I thought I could add #250 to the code thinking the tool would remain at the bottom of the groove for a few milliseconds before retracting but it does not work.
When Mach 3 sees the first line with the #250 it stops and says there needs to be an equal sign.
Where does the equal sign need to be? I tried to add the equal sign like this #=250 or =#250 but Mach3
still does not accept the code.
This should be an easy fix but I'm lost.
Jim