ohiojohnny85
Plastic
- Joined
- Jun 17, 2009
- Location
- Lodi, Ohio
HELP!!! My main lathe has a Delta Dynapath 20 control. It was idling, so I hit the E-stop. Got done on the mill, went back to the lathe, now it won't come out of E-stop. I rebooted several times, no fix. ERR ACT window on control is flashing green every three seconds. I have 24 volts in and out of the stop switch, and 24 volts downstream to all the limit switches, and all the switches seem to be functioning fine. Repairman can't get to me for a week or more, and I am DEAD IN THE WATER without this lathe. PLease help me before I lose my butt over this. JC