cuttergrinder
Hot Rolled
- Joined
- Mar 16, 2007
- Location
- Salem,Ohio
We have some double nuts at work that need threaded. They are basically just 2" thick 4140 that needs two holes threaded 2 1/2" -4 thread. We have done these before on a horizontal boring mill and just power tapped them. The problem is the thread doesn't come out as nice as we would like. I would like to thread mill these with a Mazak vtc16 with a mazatrol m32 control. Is this possible and if it is, what kind of tooling do we need. Sorry for the dumb questions but I have never thread milled or seen it done.