machine1medic
Titanium
- Joined
- Jul 1, 2006
- Location
- Clover Hill district, WI
I'm swamped picking up 5-face operation on our new SNK bridge-mill.
Fanuk 31i , and the SNK's abillity to run a face-on prog
in any aspect is awesome. We have a very urgent job to take from
Heidenhain over to the SNK.
A while back I had time to brouse our 425 manual.....thought I read
that it could spit-out a G-code file, we could then chop-up and
run through Master-Cam, instead of an entirely fresh effort.
I don't have a minute to waste, !! Did I read correctly?
If so it's worth doubling back into the manual.....to try it.
Thanks in advance for any input..............
M1M
Fanuk 31i , and the SNK's abillity to run a face-on prog
in any aspect is awesome. We have a very urgent job to take from
Heidenhain over to the SNK.
A while back I had time to brouse our 425 manual.....thought I read
that it could spit-out a G-code file, we could then chop-up and
run through Master-Cam, instead of an entirely fresh effort.
I don't have a minute to waste, !! Did I read correctly?
If so it's worth doubling back into the manual.....to try it.
Thanks in advance for any input..............
M1M