spock
Stainless
- Joined
- Dec 29, 2006
- Location
- Central Ky
Well, after 20 years it looks like I need a lesson in Programming 101. Starting a program with a facing cut, IF it is the first time I push cycle start, it runs fine. After that, I am getting the "O11 P/S" alarm, indicating that there is no feedrate. Please, look at my program, and tell me what I am missing. Cause I see a feedrate, but the control is not for some reason. And, keep in mind, that the other 2 programs that I have run on this lathe are programmed the same and I had no trouble at all. So, I must be missing something.
Here is my code:
O3333
N1 G50 S2500
G00 T0101
G40
G96 S0500 M03
X0.8 Z0.0 (machine positions here, then alarms)
G01 X-.064 F0.006
Z0.02
G00 X.591
etc......
Here is my code:
O3333
N1 G50 S2500
G00 T0101
G40
G96 S0500 M03
X0.8 Z0.0 (machine positions here, then alarms)
G01 X-.064 F0.006
Z0.02
G00 X.591
etc......