Fanuc Robo Drill - will not power

wannabmachinist · Nov 22, 2017

I have a 1998 Fanuc T10 Robo Drill that will not power up. There is power to the on/off machine disconnect and power to the contactor but when you turn the power on and the control panel nothing happens. The contactor does not pull in. I do not have power coming in to my 24v power supply either. What I am I missing? I have checked every fuse I can find, I may be missing one.

ewlsey · Nov 22, 2017

Well, where's the power for the 24V supply come from? Trace that back. Probably to a transformer making 110V from the 240 3 phase input.

wannabmachinist · Nov 22, 2017

Thank you, working on it now. The incoming power for the 24v power supply should be 200-240v. I awesome that it is legged off the main incoming. But, tracing to find out for sure.

Search

Largest Manufacturing Technology Community on the Web

Search

Fanuc Robo Drill - will not power

wannabmachinist

Plastic

ewlsey

Diamond

wannabmachinist

Plastic

Similar threads