Hi all
Im having problems trying to add tool nose comp for first time on a mori cl20 lathe.
Im trying to do internal rads with a small boring bar, tip facing away from me and down towards floor as I look at it.
G0Z1.0
G1G41X20.15F.08
G1Z0.0
G02X18.55Z-.8R.8
G1Z-5.5
G03X16.95Z-6.3R.8
G1X16.7
G02X14.3Z-7.5R1.2
G1Z-13.5
X13.0
G0G40Z3.0
G00G28U0.0W0.0
M09
This is the code I have as I understand it should be with a .4 rad and tool option 2 in offset page.
The program is stopping at the G1Z-13.5 line with error code 041 INTERFERENCE IN NRC and the m/c looks to be starting to radius at the G1G41X20.15 line before it even gets to the first G02.
Any help please?
Im having problems trying to add tool nose comp for first time on a mori cl20 lathe.
Im trying to do internal rads with a small boring bar, tip facing away from me and down towards floor as I look at it.
G0Z1.0
G1G41X20.15F.08
G1Z0.0
G02X18.55Z-.8R.8
G1Z-5.5
G03X16.95Z-6.3R.8
G1X16.7
G02X14.3Z-7.5R1.2
G1Z-13.5
X13.0
G0G40Z3.0
G00G28U0.0W0.0
M09
This is the code I have as I understand it should be with a .4 rad and tool option 2 in offset page.
The program is stopping at the G1Z-13.5 line with error code 041 INTERFERENCE IN NRC and the m/c looks to be starting to radius at the G1G41X20.15 line before it even gets to the first G02.
Any help please?