KevinV_MEI
Plastic
- Joined
- May 11, 2012
- Location
- Almont, Mi, USA
Trying to get a conversational post to work in either Fusion 360 or Inventor 2018 and have a question about using datum tables and cycle def 7 or 247.
Here is the code it puts out.
21 CYCL DEF 247 DATUM SETTING ~ I get an error 21 with no further explanation. I can't find a cycle 247. 7 yes but I get an incomplete cycl def if I change 247 to 7. I do want to use the datum table stored on the controller. This is as far as I was able to get on this one.
Q339=1 ; DATUM NUMBER
Thanks.
Kevin V.
Here is the code it puts out.
21 CYCL DEF 247 DATUM SETTING ~ I get an error 21 with no further explanation. I can't find a cycle 247. 7 yes but I get an incomplete cycl def if I change 247 to 7. I do want to use the datum table stored on the controller. This is as far as I was able to get on this one.
Q339=1 ; DATUM NUMBER
Thanks.
Kevin V.